STI's CMCP500 Series Din Rail Mounted Transmitters are available in 15 versions including all vibration parameters, temperature, speed and all TSI (Turbine Supervisory Instrumentation) functions. Transmitters include OK Circuit and a Buffered BNC Connector for Portable Vibration Analyzers. With the optional Alarm Module they function as a single channel protection system with OK, Alert and Danger Alarms. STI's CMCP500 Series are CSA/UL Class 1 Division 2 and CE approved.
Click on the image below to view the product page and datasheets.
- IEPE Accelerometer Input
- Acceleration Output (g's)
- Transmitter or Monitor (Alarms)
- RMS or Peak Detection
- 4-20mA Output
- 2 Buffered Outputs
- 5 Selectable Ranges
- Fault (OK) Detection
- CSA & UL Class 1 Division 2 Approved
- IEPE Accelerometer Input
- Velocity Output (In/s or mm/s)
- Transmitter or Monitor (Alarms)
- RMS or Peak Detection
- 4-20mA Output
- 2 Buffered Outputs
- 5 Selectable Ranges
- Fault (OK) Detection
- CSA & UL Class 1 Division 2 Approved
- Piezo-Velocity Input
- Displacement Output (mils, microns)
- Transmitter or Monitor (Alarms)
- RMS or Peak Detection
- 4-20mA Output
- 2 Buffered Outputs
- 5 Selectable Ranges
- Fault (OK) Detection
- CSA & UL Class 1 Division 2 Approved
- Proximity Probe (Eddy Probe) Input
- Displacement Output (mils, microns)
- Transmitter or Monitor (Alarms)
- RMS or Peak Detection
- 4-20mA Output
- 2 Buffered Outputs
- 5 Selectable Ranges
- Fault (OK) Detection
- CSA & UL Class 1 Division 2 Approved
- Proximity Probe (Eddy Probe) Input
- Position Output (mils, microns)
- Transmitter or Monitor (Alarms)
- RMS or Peak Detection
- 4-20mA Output
- 2 Buffered Outputs
- Normally Away or Normally Towards Selectable
- Fault (OK) Detection
- CSA & UL Class 1 Division 2 Approved
- 10mV/Deg C Input from Dual Output Sensors
- Temperature Output (C or F)
- Transmitter or Monitor
- Voltage Detection
- Type "T" Accelerometers
- 4-20 mA Output
- 2 Buffered Outputs
- Fault (OK) Detection
- CSA & UL Class 1 Division 2 Approved
- Accepts Inputs from All Proximity Probe Systems
- Provides a 5VDC TTL Pulse Output Per Revolution
- Works with Recessed or Raised Targets
- Adjustable Triggering with Local Trigger Indication
- 0-15kHz Frequency Range (0-900,000 RPM @ 1 Pulse Input)
- 0.01% Accuracy
- Din Rail Mountable
- 24VDC Powered
- IEPE Accelerometer Input
- Enveloped Acceleration Output (gE)
- 3 Ranges and 3 Bandwidths
- 4-20mA Output
- Two Buffered Outputs
- Class 1 Division 2, Groups B-D
- CE Approved
STI
- High Pass Filter
- 4 Pole
- For CMCP500 Series
- Any Frequency in Hz
- 1 Hz to 100 kHz
- Stocked Standards
- Create a Bandpass Filter
- Useful for Gas Turbines/Aircraft Derivatives
STI
- Low Pass Filter
- 4 Pole
- For CMCP500 Series
- Any Frequency in Hz
- 1 Hz to 100 kHz
- Stocked Standards
- Create a Bandpass Filter
- Useful for Gas Turbines/Aircraft Derivatives
