|
|
|
|
|
|
CMCP610-01 Benchtop Proximity Probe Static Calibrator - 4140 Target
|
Our Price: $590.00
|
|
|
The CMCP610 Eddy Probe Calibrator provides a convenient and precise method of verifying the voltage output vs. physical gap of an Eddy Probe and Driver system. Designed for use in the field or the shop, the CMCP610 will work with any manufacturer's 5mm or 8mm probe systems. It will accommodate both 1/"-28 and 3/8"-24 UNF eddy probes and accept any probe length.
|
|
|
|
|
|
|
|
|
|
CMCP801 Relative Proximity Probe Holder - Ordering Page
|
|
|
The CMCP801 Probe Holder is designed for the external mounting of Proximity (Eddy) Probes as described and recommended by API-670. External (through the case) mounting allows for the easy removal, inspection, and adjustment of the Proximity Probe as opposed to internal mounting where the bearing cap or cover needs to be removed prior to inspection.The CMCP801 Probe Holder has an adjustment range of plus or minus 1" (2.54 cm), 2" (5.08 cm) overall. The CMCP801 can be cut in the field or by a local machine shop to the required insertion depth. Additional insertion depth by using longer Proximity Probes.
|
|
|
|
|
|
|
|
|
|
CMCP802 3/4"NPT to 1/2"NPT Adapter for CMCP801 (Adds 2" to Height)
|
|
Our Price: $75.00
|
|
|
3/4"NPT to 1/2"NPT Adapter for CMCP-801 (Adds 2" to Height)
|
|
|
|
|
|
|
|
|
|
CMCP4190 NPT Proximity Probe Adapters
|
|
Our Price: $65.00
|
|
|
STI Vibration Monitoring offers the CMCP4190 for probe installations where the shaft is only a short distance from the bearing housing. The probe adapter is a 1/2" or 3/4" NPT threaded on either end for mounting to the housing, and a conduit head. The ID thread is available to fit the 2 common eddy probe thread sizes. For particularly long probes an optional deep conduit head is available. The CMCP4190 is made of 316 Stainless Steel.
|
|
|
|
|
|
|
|
|
|
CMCP805 Aluminum Proximity Probe Mounting Bracket - Ordering Page
|
|
|
Mounting Brackets are used when installing eddy probes (proximity probes) internally in the machine. They may be mounted directly to the side of radial bearings using two (2) 1/4"-28 Cap Screws. The brackets are 1/2" High x 1" Wide x 1" Deep (12.7 x 25.4 x 25.4 mm). The eddy probe mounting hole is offset 3/4" or 1/4" (19.05 or 6.35 mm) depending on the mounting direction of the block relative to the bearing. Tightening the mounting bolts applies a positive lock to the eddy probe preventing movement of the probe after mounting. These mounting blocks are available for 1/4"-28 UNF, 3/8"-24 UNF probe body threads. Since these mounting blocks are manufactured from Aluminum, they may be easily machined in the field as required during installation.
|
|
|
|
|
|
|
|
|
|
CMCP803 Explosion Proof Conduit Head
|
|
Our Price: $95.00
|
|
|
The CMCP803 Explosion Proof Conduit Head is designed to be used with the CMCP4190 Eddy probe Adapter and is available in both 1/2" and 3/4" NPT versions. It is furnished with a 2" Dome lid with "O" ring seal. The CMCP803 is suitable for Class I, Div. 1 and 2, if installed in compliance with NEC 501-4(a)(b) and for Class II, Div. 1 and 2, if in compliance with NEC, 502-4(a)(b).
Not supplied with CMCP4190 Probe Adapter or Eddy Probe as in picture.
|
|
|
|
|
|
|
|
|
|
CMCP140 NEMA 4 Painted Steel Enclosures for DIN Rail Drivers
|
|
Our Price: $235.00
|
|
|
NEMA 4 powder-coated mild steel enclosures for din rail mounted proximity probe drivers.
- Available in multiple sizes to accomodate up to 14 probe drivers
- ANSI 61 powder coated on the interior and exterior surfaces
- Constructed from 14 gauge mild steel
- NEMA 4 rating for use in areas which may be regularly hosed down or are very wet
- Door features oil resistant gasket and stainless steel clamps for easy screwdriver access
|
|
|
|
|
|
|
|
|
|
CMCP150 NEMA 4X Stainless Steel Enclosure for DIN Rail Drivers
|
|
Our Price: $475.00
|
|
|
NEMA 4X stainless steel enclosures for din rail mounted proximity probe drivers.
- Available in multiple sizes to accomodate up to 14 probe drivers
- Constructed from 14 gauge 304 stainless steel
- NEMA 4X rating for use in corrosive very wet environments and may be regularly hosed down
- Door features oil resistant gasket and stainless steel clamps for easy screwdriver access
|
|
|
|
