• Two Levels of Alarm with Relays
  
• True “OK” Circuitry with Relay
  
• Adjustable Time Delays
  
• Trip Multiply
  
• 4-20mA Output
  
• Buffered Transducer Output
  
• Bright LED Digital Readout
  
• 0-1.0 in/sec or 0-25 mm/sec RMS Range

The CMCP5301 Vibration Monitors that have been designed for use on typical rotating machinery such as motors, pumps fans, turbines, compressors, chillers., etc. The CMCP5301 accept inputs from any industry standard 100 mV/g accelerometer, condition’s the input signals to velocity and provides a digital display and alarm status indication. Analog outputs (4-20 mA) are provided for each channel for interface to a PLC or DCS for trending, alarm and operator interface. The alarm contacts for the OK circuit, and Alert and Danger may be interfaced to machine control and shutdown systems for a complete vibration protection solution. The system is a pre-wired turn-key package with power supply, and bright LED display(s). The power supply accepts 110 or 220 VAC, 50 or 60 Hz. They are available in either an English or Metric configuration.

Electrical:
Range: English 0-1.0 in/sec RMS, Metric 0-25 mm/sec RMS
Power: Accepts 110 VAC or 220 VAC, 60 or 50 Hz
Frequency Response: (-3 dB) 2 Hz to 2 kHz
Buffered Output: BNC Connector 0-20 kHz
Accuracy: 0.5 % of Full Scale
Range Output: 4-20 mA proportional to the full scale range
Relay output for Alert and Danger alarms
Maximum Load: 600 Ohms Resistive per channel
Case: Isolated

Environmental:
Operating Temp.: -20oC to +80oC (-4oF to +176oF)
Storage Temp.: -55oC to +125oC (-67oF to +257oF)
Relative Humidity: 0 - 95% Non-Condensing
Approvals: NEMA 4X Fiberglass

Mechanical:
Physical Dimensions: Width: 7.25”, Height: 7.25”, Depth: 5.00”