Temperature Sensor and Transmitters

You are here: Home > Temperature

Sort By:

Page of 1

CMCP1210 Spring Loaded Tip Sensitive Bearing Temperature Sensors

Our Price: $225.00

The CMCP1210 bearing temperature sensor provides fast and accurate readings from bearings, blocks, and other solids.

Spring-loaded holder ensures solid contact in drilled holes with a built-in oil seal
Aluminum or stainless steel connection head (explosion-proof version available)
Copper alloy tip for quick response to temperature changes
Probe may be cut to length in the field using a tube cutter
Available with RTD or Thermocouple sensing element

CMCP560 Isolated RTD Temperature Transmitter

Our Price: $455.00

The CMCP560 RTD Temperature Transmitter is compatable with 100 Ohm Platinum 3 wire RTD's. Available in English scaling, the CMCP560 checks for faults, processes the temperature signal to determine overall amplitude, and outputs a 4-20 mA dc current that is proportional to a range of 0 to 250° F (-17.7 to 121° C). Combining transmitters with an existing PLC or DCS system results in a high density, low cost vibration monitoring system.

The Optional Alarm Module provides ok, alert and danger relays, selectable time delay, trip multiply, bypass and 0 to 5 VDC outputs for displays. The relay outputs can be used to trigger machine shut-down or other alarms. Combining transmitters with an existing PLC or DCS system results in a high density, low cost temperature monitoring system.

CSA & UL Approved

CMCP565 Isolated Thermocouple Temperature Transmitter

Our Price: $455.00

The CMCP565 Isolated Thermocouple Temperature Transmitters are compatible with J and K type thermocouple inputs, and they provide a 4-20 mA output proportional to the overall measurement. Each unit processes the signal to determine overall amplitude, and outputs a 4-20 mA dc current that is proportional to a user specified range such as 0-250 Deg. F.

Solid State Temperature Transmitter/Monitor

CMCP570 Solid State Temperature Transmitter

Our Price: $455.00

The CMCP570 Solid State Temperature Transmitter is compatible with Accelerometers with internal solid state temperature sensing elements such as the 793T and 797T. It is available in English or Metric scaling. The CMCP565 provides constant current power, checks for faults, processes the temperature signal to determine overall amplitude, and outputs a 4-20 mA dc current that is proportional to a range of 0 to 250° F (-17.8 to 121°C). Combining transmitters with an existing PLC or DCS system results in a high density, low cost vibration monitoring system.