Turbine Supervisory Instrumentation

You are here: Home > TSI Systems

Sort By:

Page of 2

CMCP525 Acceleration Transmitter/Monitor

CMCP525 Accelerometer In/Acceleration Out Transmitter

Our Price: $445.00

The CMCP525 Acceleration In/Acceleration Out Transmitter is available in either "Peak" or "True RMS" signal detection versions. The CMCP525 is compatible with all voltage output accelerometers, and provides a 4-20 mA output proportional to the overall measurement. Each unit provides constant current power for the accelerometer, checks for faults, processes the vibration signal to determine overall amplitude, and outputs a 4-20 mA DC current that is proportional to a user selected range of 5, 10, 15, 20 or 25 g's with a 100 mv/g Input. CSA and UL Class 1, Div 2, B-D Approved.

The Optional Alarm Module provides OK, Alert and Danger Relays, selectable time delay, trip multiply, bypass and 0 to 5 VDC outputs for displays. The relay outputs can be used to trigger machine shut-down or other alarms. Combining transmitters with an existing PLC or DCS system results in a high density, low cost vibration monitoring system.

CMCP530 Accelerometer In/ Velocity Out Transmitter

Our Price: $445.00

The CMCP530 Accelerometer based Velocity Transmitter is available in either "Peak" or "True RMS" signal detection versions and English or Metric scaling. The CMCP530 is compatible with all 100mV/g output accelerometers, and provides a 4-20 mA output proportional to the overall measurement. Each unit provides constant current power for the accelerometer, checks for faults, processes the vibration signal to determine overall amplitude, and outputs a 4-20 mA dc current that is proportional to a user selectable range of 0.5, 1.0, 1.5, 2.0 and 2.5 in/sec (metric equivelant of 12.7, 25.4, 38.1, 50.8 and 63.5 mm/sec) with a 100 mv/g Input. Combining transmitters with an existing PLC or DCS system results in a high density, low cost vibration monitoring system.

CMCP535 Displacement Transmitter or Monitor

CMCP535 Velocity In/ Displacement Out Transmitter

Our Price: $445.00

The CMCP535 Displacement Transmitter is compatable with both 100mV/In/Sec Piezo Electronic (Accelerometer w/Velocity Output) and 500mV/In/Sec Electro Mechanical Velocity Transducers and is available in English or Metric scaling. The CMCP535 provides constant current power (if required), checks for faults, processes the vibration signal to determine overall amplitude, and outputs a 4-20 mA dc current that is proportional to a user selected range of 5, 10, 15, 20 or 25 mils (metric equivelant of 127, 254, 381 508 or 635 microns). Combining transmitters with an existing PLC or DCS system results in a high density, low cost vibration monitoring system.

The Optional Alarm Module provides ok, alert and danger relays, selectable time delay, trip multiply, bypass and 0 to 5 VDC outputs for displays. The relay outputs can be used to trigger machine shut-down or other alarms. Combining transmitters with an existing PLC or DCS system results in a high density, low cost vibration monitoring system.

CSA & UL Approved

CMCP540 Proximity Probe In/ Displacement Out Transmitter

Our Price: $445.00

The CMCP540 Displacement Transmitter is compatable with all manufactures Eddy Probe or Proximity Probe Systems with a voltage output of 200 mv/mil and is available in English or Metric scaling. The CMCP540 checks for faults, processes the vibration signal to determine overall amplitude, and outputs a 4-20 mA dc current that is proportional to a user selected range of 0 to 5, 10, 15, 20 or 25 mils (0 to 127, 254, 381, 508 or 635 microns). Combining transmitters with an existing PLC or DCS system results in a high density, low cost vibration monitoring system.

CMCP545 Proximity Probe In/ Position Out Transmitter

Our Price: $445.00

The CMCP545 Position (Thrust) Transmitter is compatable with all manufactures Eddy Probe or Proximity Probe Systems with a voltage output of 100 or 200 mv/mil and is available in English and Metric scaling. The CMCP545 checks for faults, processes the vibration signal to determine overall amplitude, and outputs a 4-20 mA dc current that is proportional to range of 0 to 80 mils (40-0-40) or the Metric equivalent of 0 to 2 mm (1.0-0-1.0 mm). Internal Jumpers select normal motion towards or away from sensor. Combining transmitters with an existing PLC or DCS system results in a high density, low cost vibration monitoring system.

Differential Expansion Transmitter/Monitor

CMCP547 Differential Expansion Transmitter

Our Price: $660.00

The CMCP547 Differential Expansion Transmitter are compatible with LVDT and proximity probe inputs, they provide a 4-20 mA output proportional to the overall measurement. Each unit provides power for the associated transducer, processes the signal, and outputs a 4-20 mA dc current that is proportional to a user specified range such as 0-2 inches. Combining monitors with an existing PLC or DCS system results in a high density, low cost vibration monitoring system.

With the alarm option, the unit functions as a complete single channel monitor that includes alert and danger alarms, and output relays.

CMCP548 Case Expansion Transmitter for LVDT's

Our Price: $660.00

The CMCP548 Case Expansion Transmitter are compatible with 10mV/mil LVDT inputs, they provide a 4-20 mA output proportional to the overall measurement. Each unit provides power for the associated transducer, processes the signal, and outputs a 4-20 mA dc current that is proportional to a user specified range such as 0-2 inches. Combining Transmitters with an existing PLC or DCS system results in a high density, low cost vibration monitoring system.

CMCP546 Absolute Vibration Transmitters

Our Price: $660.00

The CMCP546 Absolute Vibration Transmitter combines two (2) inputs, Shaft Relative using a proximity probe and Case Absolute using a Piezovelocity or mechanical velocity sensor to produce Shaft Absolute in Displacement terms for use on heavy rotor/light case machines. Outputs include a 4-20 mA transmitter signal for use by PLC/DCS and a buffered raw signal output representing the Absolute Vibration for use by Data Collectors and Analyzers. With the addition of the alarm module OK, Alert and Danger set points, alarms and relays are provided.

CMCP549 Valve Position Transmitter

Our Price: $660.00

The CMCP549 Valve Position monitors are compatible with rotary potentiometer (resistance) inputs, they provide a 4-20 mA output proportional to the overall measurement. Each unit provides power for the associated transducer, processes the signal, and outputs a 4-20 mA dc current that is proportional to a user specified range such as 0-100%. Combining monitors with an existing PLC or DCS system results in a high density, low cost vibration monitoring system.

With the optional alarm feature, the unit functions as a complete single channel monitor that includes alert and danger alarms, and output relays.

CMCP560 Isolated RTD Temperature Transmitter

Our Price: $445.00

The CMCP560 RTD Temperature Transmitter is compatable with 100 Ohm Platinum 3 wire RTD's. Available in English scaling, the CMCP560 checks for faults, processes the temperature signal to determine overall amplitude, and outputs a 4-20 mA dc current that is proportional to a range of 0 to 250° F (-17.7 to 121° C). Combining transmitters with an existing PLC or DCS system results in a high density, low cost vibration monitoring system.

CMCP565 Isolated Thermocouple Temperature Transmitter

Our Price: $445.00

The CMCP565 Isolated Thermocouple Temperature Transmitters are compatible with J and K type thermocouple inputs, and they provide a 4-20 mA output proportional to the overall measurement. Each unit processes the signal to determine overall amplitude, and outputs a 4-20 mA dc current that is proportional to a user specified range such as 0-250 Deg. F.

Solid State Temperature Transmitter/Monitor

CMCP570 Solid State Temperature Transmitter

Our Price: $445.00

The CMCP570 Solid State Temperature Transmitter is compatible with Accelerometers with internal solid state temperature sensing elements such as the 793T and 797T. It is available in English or Metric scaling. The CMCP565 provides constant current power, checks for faults, processes the temperature signal to determine overall amplitude, and outputs a 4-20 mA dc current that is proportional to a range of 0 to 250° F (-17.8 to 121°C). Combining transmitters with an existing PLC or DCS system results in a high density, low cost vibration monitoring system.

CMCP575 Speed Transmitter

Our Price: $725.00

The CMCP575 Isolated Speed Three-Wire Transmitter is one in a family of the 500 Series Transmitters that provide field mounted efficiency and ease of wiring in a compact DIN package. The CMCP575 accepts a frequency or pulse rate input and converts it to a standard process signal output, 4-20mA for interfacing directly with PLC's, DCS's and process computers.

The CMCP575 provides independent linearity equivalent to 14-bit digital accuracy and include user friendly features such as wide ranging and non-interactive zero and span controls. The power range is 15 to 42 VDC @ 28 mA typical.

CMCP585 Eccentricity Transmitter

Our Price: $660.00

The CMCP585 Eccentricity Transmitters are compatible with proximity probe inputs, they provide a 4-20 mA output proportional to the overall measurement. Each unit provides power for the associated transducer, processes the vibration signal to determine overall amplitude, and outputs a 4-20 mA dc current that is proportional to a user specified range such as 0-10 mils. Combining transmitters with an existing PLC or DCS system results in a high density, low cost vibration monitoring system.

When specified with optional alarm feature (CMCP585A), the unit functions as a complete single channel monitor that includes alert and danger alarms, and output relays.

CMCP-TACH3 Tachometer

Our Price: $850.00

The CMCP-TACH3 is front panel programmable for single or multiple pulses per revolution and scaling. It may be used as Tachometer, Rate-meter, Counter, or a Totalizer. The tachometer also offers Rate Of Acceleration. The CMCP-TACH3 offers a fixed or floating decimal point and can be supplied with Remote Optical, Infrared, Laser, Proximity, and Magnetic Sensors. It is directly compatible with a TTL input and a 200mV to 50 Vac signal. The TACH3 has front panel programmable set points, analog voltage and current, TTL and RS232 outputs. The TACH3 can be modified to accept a -24 Vdc Eddy Current Probe input. The TACH3 offers more standard features than any other tachometer available.