|
|
|
|
|
|
CMCP-602H High Temp. 2-Pin Accelerometer Cables - Ordering Page
|
|
|
The CMCP-602H High Temperature Extension cables are designed to work with all Accelerometers using a 2-pin MIL Spec 5015 connector. The cables utilize an environmental designed MIL Spec. Connector with a positive seal “0” ring that mates with the MIL-C-5015 connector found on most accelerometers. Connector backshells are fully potted and designed to be water tight. 20 AWG cable is twisted and shielded for EMI and RFI protection. The CMCP602H cables are available in three standard lengths of 16’, 32’ and 64’. Any length desired may be specified and ordered as an option. The Teflon coated wire is 0.200" in diameter.
|
|
|
|
|
|
|
|
|
|
|
CMCP-602L Standard 2-Pin Accelerometer Cables - Ordering Page
|
|
|
The CMCP-602L extension cables are designed to work with all Accelerometers using a MIL Spec 5015 2-pin connector. The cables utilize an environmental designed MIL Spec. Connector with a positive seal “0” ring that mates with the MIL-C-5015 connector found on most accelerometers. Connector backshells are fully potted and designed to be water tight. 20 AWG cable is twisted and shielded for EMI and RFI protection. The CMCP-602L is available in three standard lengths of 16’, 32’ and 64’. Any length desired may be specified and ordered as an option. The wire is 0.200” in diameter.
|
|
|
|
|
|
|
|
|
|
|
CMCP-603H High Temperature 3-Pin Accelerometer Cables - Ordering Page
|
|
|
The CMCP-603H High Temperature Extension cables are designed to work with all Accelerometers using a MIL Spec 5015 3-pin connector. The cables utilize an environmental designed MIL Spec. Connector with a positive seal “0” ring that mates with the MIL-C-5015 connector found on most accelerometers. Connector backshells are fully potted and designed to be water tight. 20 AWG cable is twisted and shielded for EMI and RFI protection. The CMCP-603H is available in three standard lengths of 16’, 32’ and 64’. Any length desired may be specified and ordered as an option. The wire is 0.200” in diameter.
|
|
|
|
|
|
|
|
|
|
|
CMCP-603L Standard 3-Pin Accelerometer Cables - Ordering Page
|
|
|
The CMCP-603L extension cables are designed to work with all Accelerometers using a MIL Spec 5015 3-pin connector. The cables utilize an environmental designed MIL Spec. Connector with a positive seal “0” ring that mates with the MIL-C-5015 connector found on most accelerometers. Connector backshells are fully potted and designed to be water tight. 20 AWG cable is twisted and shielded for EMI and RFI protection. The CMCP-603L is available in three standard lengths of 16’, 32’ and 64’. Any length desired may be specified and ordered as an option. The wire is 0.200” in diameter.
|
|
|
|
|
|
|
|
|
|
CMCP-604 Low Cost Accelerometer Cables - Ordering Page
|
|
|
The CMCP-604 Low Cost extension cables are designed to work with all Accelerometers using a MIL Spec 5015, 2-Pin connector. The cable uses a molded Zytel (Dupont) MIL Spec. Connector with a positive seal “0” ring that mates with the MIL-C-5015 connector found on most accelerometers. The Connector is CE certified and is designed to be water tight as per NEMA 6P, 13, IEC IP67.
|
|
|
|
