|
|
|
|
|
|
CMCP-260FG NEMA 4X Fiberglass Enclosures - Ordering Page
|
|
|
Designed for use as a junction box or instrument housing these light gray fiberglass polyester enclosures are supplied with a solid hinged door secured with 2 captivated type stainless steel slotted crosspoint screws and painted steel backplate. They feature a seamless foam in-place gasket. Meets NEMA Type 4, 4X, 12 and 13 and IEC 60529 IP66 requirements. Available in 3 sizes.
|
|
|
|
|
|
|
|
|
|
CMCP-260PS NEMA 4 Painted Steel Enclosures - Ordering Page
|
|
|
Designed for use as a junction box or instrument housing these light gray powder coated steel enclosures are supplied with a solid hinged door secured with stainless steel screw clamps and painted steel backplate. They feature a seamless foam in-place gasket. Meets NEMA Type 4, 12 and 13 and IEC 60529 IP66 requirements. Available in 3 sizes.
|
|
|
|
|
|
|
|
|
|
CMCP-260SS NEMA 4X Stainless Steel Enclosures - Ordering Page
|
|
|
Designed for use as a junction box or instrument housing these 304 Stainless Steel enclosures are supplied with a solid hinged door secured with stainless steel screw clamps and painted steel backplate. They feature a seamless foam in-place gasket. Meets NEMA Type 3R, 4, 4X, 12 and 13 and IEC 60529 IP66 requirements. Available in 3 sizes.
|
|
|
|
|
|
|
|
|
|
CMCP-261 Standard Liquid Tight Strain Relief Connectors - Ordering Page
|
|
|
Liquid Tight Strain Relief Connectors are used for making direct accelerometer or transducer extension cable entries into the BNC Junction Boxes listed above. Long cable runs or cables other than the actual extension cable should be installed in conduit. Connectors are constructed of Polyamide and provide both environmental sealing and strain relief. The connectors are temperature rated to -40° to 212° F (-60° to 100° C). The connectors have a pressure rating of up to 150 PSIG.
|
|
|
|
|
|
|
|
|
|
|
CMCP-261V Viton Liquid Tight Strain Relief Connectors - Ordering Page
|
|
|
|
|
|
|
