|
|
|
|
|
|
CMCP-265FG NEMA 4X Fiberglass Termination Boxes - Ordering Page
|
|
|
The CMCP265FG series Termination Junction Boxes are multiple channel connecting centers for terminating the outputs of accelerometers or other transducer field wiring. crew Clamp DIN Rail Mounted terminals (3 per channel) are provided for the intermediate termination of Accelerometers, Proximity Probes, Speed Sensors, RTD’s, and other transducers. The CMCP265FG enclosures are made of molded fiberglass polyester and is easily punched or drilled. It has outstanding chemical and temperature resistance and physical properties. A seamless foam in-place gasket assures a watertight and dust tight seal. Screw covers are secured with captivated monel cover screws. 5 Sizes are available from 2 to 16 Channels (6 to 48 Terminals).
|
|
|
|
|
|
|
|
|
|
|
|
|
|
CMCP-265PS NEMA 4 Painted Steel Termination Boxes - Ordering Page
|
|
|
The CMCP265PS series Termination Junction Boxes are multiple channel connecting centers for terminating the outputs of accelerometers or other transducer field wiring. crew Clamp DIN Rail Mounted terminals (3 per channel) are provided for the intermediate termination of Accelerometers, Proximity Probes, Speed Sensors, RTD’s, and other transducers.
The CMCP265PS NEMA 4 enclosure is constructed of 14 gauge mild steel and is ANSI 61 gray polyester powder coated on the all surfaces. A seamless foam in-place gasket assures a watertight and dust tight seal. 5 Sizes are available from 2 to 16 Channels (6 to 48 Terminals).
|
|
|
|
|
|
|
|
|
|
|
|
|
|
CMCP-265SS NEMA 4X Stainless Steel Termination Boxes - Ordering Page
|
|
|
The CMCP265SS series Termination Junction Boxes are multiple channel connecting centers for terminating the outputs of accelerometers or other transducer field wiring. crew Clamp DIN Rail Mounted terminals (3 per channel) are provided for the intermediate termination of Accelerometers, Proximity Probes, Speed Sensors, RTD’s, and other transducers.
The CMCP265SS NEMA 4X enclosure is constructed from 14 gauge 304 Stainless Steel. This enclosure will better resist corrosive environments than the CMCP265PS steel boxes. CMCP265SS junction boxes feature continuously welded seems, ground smooth with no holes or knockouts. An oil-resistant, in-place gasket assures a watertight and dust tight seal. Stainless Steel screws and clamps are provided. 5 Sizes are available from 2 to 16 Channels (6 to 48 Terminals).
|
|
|
|
|
|
|
|
|
|
|
|
|
CMCP-261 Standard Liquid Tight Strain Relief Connectors - Ordering Page
|
|
|
Liquid Tight Strain Relief Connectors are used for making direct accelerometer or transducer extension cable entries into the BNC Junction Boxes listed above. Long cable runs or cables other than the actual extension cable should be installed in conduit. Connectors are constructed of Polyamide and provide both environmental sealing and strain relief. The connectors are temperature rated to -40° to 212° F (-60° to 100° C). The connectors have a pressure rating of up to 150 PSIG.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
CMCP-261V Viton Liquid Tight Strain Relief Connectors - Ordering Page
|
|
|
|
|
|
|
|
|
|
