|
|
|
|
|
|
CMCP-525 Vibration Acceleration Transmitter - Ordering Page
|
|
|
The CMCP525 Acceleration Transmitter is available in either "Peak" or "True RMS" signal detection versions. The CMCP525 is compatible with all voltage output accelerometers, and provides a 4-20 mA output proportional to the overall measurement. Each unit provides constant current power for the accelerometer, checks for faults, processes the vibration signal to determine overall amplitude, and outputs a 4-20 mA dc current that is proportional to a user selected range of 5, 10, 15, 20 or 25 g's with a 100 mv/g Input. Combining transmitters with an existing PLC or DCS system results in a high density, low cost vibration monitoring system.
|
|
|
|
|
|
|
|
|
|
|
CMCP-530 Vibration Velocity Transmitter - Ordering Page
|
|
|
The CMCP530 Accelerometer based Velocity Transmitter is available in either "Peak" or "True RMS" signal detection versions and English or Metric scaling. The CMCP530 is compatible with all voltage output accelerometers, and provides a 4-20 mA output proportional to the overall measurement. Each unit provides constant current power for the accelerometer, checks for faults, processes the vibration signal to determine overall amplitude, and outputs a 4-20 mA dc current that is proportional to a user selectable range of 0.5, 1.0, 1.5, 2.0 and 2.5 in/sec (metric equivelant of 12.7, 25.4, 38.1, 50.8 and 63.5 mm/sec) with a 100 mv/g Input. Combining transmitters with an existing PLC or DCS system results in a high density, low cost vibration monitoring system.
|
|
|
|
|
|
|
|
|
|
|
CMCP-535 Vibration Displacement Transmitter - Ordering Page
|
|
|
The CMCP535 Displacement Transmitter is compatable with both Piezo Electronic (Accelerometer w/Velocity Output) and Electro Mechanical Velocity Transducers and is available in English or Metric scaling. The CMCP535 provides constant current power (if required), checks for faults, processes the vibration signal to determine overall amplitude, and outputs a 4-20 mA dc current that is proportional to a user selected range of 5, 10, 15, 20 or 25 mils (metric equivelant of 127, 254, 381 508 or 635 microns). Combining transmitters with an existing PLC or DCS system results in a high density, low cost vibration monitoring system.
|
|
|
|
|
|
|
|
|
|
|
CMCP-540 Vibration Displacement Transmitter for Proximity Probes - Ordering Page
|
|
|
|
|
|
|
|
|
|
|
|
|
|
CMCP-545 Position Transmitter for Proximity Probes - Ordering Page
|
|
|
The CMCP545 Position (Thrust) Transmitter is compatable with all manufactures Eddy Probe or Proximity Probe Systems with a voltage output of 200 mv/mil and is available in English or Metric scaling. The CMCP545 checks for faults, processes the vibration signal to determine overall amplitude, and outputs a 4-20 mA dc current that is proportional to range of 0 to 80 mils (40-0-40) or the Metric equivalent of 0 to 2 mm (1.0-0-1.0 mm). Internal Jumpers select normal motion towards or away from sensor. Combining transmitters with an existing PLC or DCS system results in a high density, low cost vibration monitoring system.
|
|
|
|
|
|
|
|
|
|
|
CMCP-560 Isolated RTD Temperature Transmitter - Ordering Page
|
|
|
The CMCP560 RTD Temperature Transmitter is compatable with 100 Ohm Platinum 3 wire RTD's. Available in English scaling, the CMCP560 checks for faults, processes the temperature signal to determine overall amplitude, and outputs a 4-20 mA dc current that is proportional to a range of 0 to 250° F (-17.7 to 121° C). Combining transmitters with an existing PLC or DCS system results in a high density, low cost temperature monitoring system.
|
|
|
|
|
|
|
|
|
|
|
CMCP-565 Isolated Thermocouple Temperature Transmitter - Ordering Page
|
|
|
|
|
|
|
|
|
|
|
|
|
|
CMCP-570 Solid State Temperature Transmitter - Ordering Page
|
|
|
The CMCP570 Solid State Temperature Transmitter is compatable with Accelerometers with internal solid state temperature sensing elements such as the 793T and 797T. It is available in English or Metric scaling. The CMCP565 provides constant current power, checks for faults, processes the temperature signal to determine overall amplitude, and outputs a 4-20 mA dc current that is proportional to a range of 0 to 250° F (-17.8 to 121°C). Combining transmitters with an existing PLC or DCS system results in a high density, low cost vibration monitoring system.
|
|
|
|
|
|
|
|
|
|
|
CMCP-575 Speed Transmitter - Ordering Page
|
|
|
The CMCP575 Isolated Speed Three-Wire Transmitter is one in a family of the 500 Series Transmitters that provide field mounted efficiency and ease of wiring in a compact DIN package. The CMCP575 accepts a frequency or pulse rate input and converts it to a standard process signal output, 4-20mA for interfacing directly with PLC's, DCS's and process computers.
The CMCP575 provides independent linearity equivalent to 14-bit digital accuracy and include user friendly features such as wide ranging and non-interactive zero and span controls. The power range is 15 to 42 VDC @ 28 mA typical.
|
|
|
|
|
|
|
|
|
|
|
CMCP-580 Process Variable Transmitter - Ordering Page
|
|
|
|
|
|
|
|
|
|
|
|
|
|
CMCP-585 Eccentricity Transmitter - Ordering Page
|
|
|
|
|
|
|
|
|
|
|
|
|
|
CMCP-590 Acceleration Enveloping Transmitter - Ordering Page
|
|
|
|
|
|
|
|
|
|
|
|
|
CMCP-591 High Pass Filters for CMCP-500 Series Transmitters/Monitors - Ordering Page
|
|
|
Optional 8 Pole High Pass Filter for CMCP500 Series Transmitters and Monitors.
|
|
|
|
|
|
|
|
|
|
|
CMCP-592 Low Pass Filter for CMCP-500 Series Transmitters/Monitors - Ordering Page
|
|
|
Optional 8 Pole Low Pass Filter for CMCP500 Series Transmitters and Monitors.
|
|
|
|
|
|
|
|
|
|
|
CMCP-547 Differential Expansion Transmitter - Ordering page
|
|
|
|
|
|
|
|
|
|
|
|
|
|
CMCP-548 Case Expansion Transmitter - Ordering Page
|
|
|
|
|
|
|
|
|
|
|
|
|
|
CMCP-549 Valve Position Tranmitter - Ordering Page
|
|
|
|
|
|
|
