STI - Leaders in Vibration Monitoring and Machine Protection Systems.

You are here: Home > Single Channel Monitors

Sort By:

Page of 2

CMCP-525A Vibration Acceleration Monitor - Ordering Page

The CMCP525A Acceleration Monitor is available in either "Peak" or "True RMS" signal detection versions. The CMCP525A is compatible with all voltage output accelerometers, and provides a 4-20 mA output proportional to the overall measurement. Each unit provides constant current power for the accelerometer, checks for faults, processes the vibration signal to determine overall amplitude, and outputs a 4-20 mA dc current that is proportional to a user selected range of 5, 10, 15, 20 or 25 g's with a 100 mv/g Input.

The CMCP525A Alarm Module provides ok, alert and danger relays, selectable time delay, trip multiply, bypass and 0 to 5 VDC outputs for displays. The relay outputs can be used to trigger machine shut-down or other alarms. Combining transmitters with an existing PLC or DCS system results in a high density, low cost vibration monitoring system.

CMCP-530A Vibration Velocity Monitor - Ordering Page

The CMCP530 Accelerometer based Velocity Monitor is available in either "Peak" or "True RMS" signal detection versions and English or Metric scaling. The CMCP530 is compatible with all voltage output accelerometers, and provides a 4-20 mA output proportional to the overall measurement. Each unit provides constant current power for the accelerometer, checks for faults, processes the vibration signal to determine overall amplitude, and outputs a 4-20 mA dc current that is proportional to a user selectable range of 0.5, 1.0, 1.5, 2.0 and 2.5 in/sec (metric equivelant of 12.7, 25.4, 38.1, 50.8 and 63.5 mm/sec) with a 100 mv/g Input. Combining transmitters with an existing PLC or DCS system results in a high density, low cost vibration monitoring system.

The CMCP530A Alarm Module provides ok, alert and danger relays, selectable time delay, trip multiply, bypass and 0 to 5 VDC outputs for displays. The relay outputs can be used to trigger machine shut-down or other alarms.

CMCP-535A Vibration Displacement Monitor - Ordering Page

The CMCP535 Displacement Monitor is compatable with both Piezo Electronic (Accelerometer w/Velocity Output) and Electro Mechanical Velocity Transducers and is available in English or Metric scaling. The CMCP535 provides constant current power (if required), checks for faults, processes the vibration signal to determine overall amplitude, and outputs a 4-20 mA dc current that is proportional to a user selected range of 5, 10, 15, 20 or 25 mils (metric equivelant of 127, 254, 381 508 or 635 microns). Combining transmitters with an existing PLC or DCS system results in a high density, low cost vibration monitoring system.

The CMCP535A Alarm Module provides ok, alert and danger relays, selectable time delay, trip multiply, bypass and 0 to 5 VDC outputs for displays. The relay outputs can be used to trigger machine shut-down or other alarms. Combining transmitters with an existing PLC or DCS system results in a high density, low cost vibration monitoring system.

CMCP-540A Vibration Displacement Monitor for Proximity Probes - Ordering Page

The CMCP540 Displacement Monitor is compatable with all manufactures Eddy Probe or Proximity Probe Systems with a voltage output of 200 mv/mil and is available in English or Metric scaling. The CMCP540 checks for faults, processes the vibration signal to determine overall amplitude, and outputs a 4-20 mA dc current that is proportional to a user selected range of 0 to 5, 10, 15, 20 or 25 mils (0 to 127, 254, 381, 508 or 635 microns). Combining transmitters with an existing PLC or DCS system results in a high density, low cost vibration monitoring system.

The CMCP540A Alarm Module provides ok, alert and danger relays, selectable time delay, trip multiply, bypass and 0 to 5 VDC outputs for displays. The relay outputs can be used to trigger machine shut-down or other alarms. Combining transmitters with an existing PLC or DCS system results in a high density, low cost vibration monitoring system.

CMCP-545A Position Monitor for Proximity Probes - Ordering Page

The CMCP545 Position (Thrust) Monitor is compatable with all manufactures Eddy Probe or Proximity Probe Systems with a voltage output of 200 mv/mil and is available in English or Metric scaling. The CMCP545 checks for faults, processes the vibration signal to determine overall amplitude, and outputs a 4-20 mA dc current that is proportional to range of 0 to 80 mils (40-0-40) or the Metric equivalent of 0 to 2 mm (1.0-0-1.0 mm). Internal Jumpers select normal motion towards or away from sensor. Combining transmitters with an existing PLC or DCS system results in a high density, low cost vibration monitoring system.

The CMCP545A Alarm Module provides ok, alert and danger relays, selectable time delay, trip multiply, bypass and 0 to 5 VDC outputs for displays. The relay outputs can be used to trigger machine shut-down or other alarms. Combining transmitters with an existing PLC or DCS system results in a high density, low cost vibration monitoring system.

CMCP-560A Isolated RTD Temperature Monitor - Ordering Page

The CMCP560 RTD Temperature Monitor is compatable with 100 Ohm Platinum 3 wire RTD's. Available in English scaling, the CMCP560 checks for faults, processes the temperature signal to determine overall amplitude, and outputs a 4-20 mA dc current that is proportional to a range of 0 to 250� F (-17.7 to 121� C). Combining transmitters with an existing PLC or DCS system results in a high density, low cost vibration monitoring system.

The CMCP560A Alarm Module provides ok, alert and danger relays, selectable time delay, trip multiply, bypass and 0 to 5 VDC outputs for displays. The relay outputs can be used to trigger machine shut-down or other alarms. Combining transmitters with an existing PLC or DCS system results in a high density, low cost temperature monitoring system.

CMCP-565A Isolated Thermocouple Temperature Monitor - Ordering Page

CMCP-570A Solid State Temperature Monitor - Ordering Page

The CMCP570 Solid State Temperature Monitor is compatable with Accelerometers with internal solid state temperature sensing elements such as the 793T and 797T. It is available in English or Metric scaling. The CMCP565 provides constant current power, checks for faults, processes the temperature signal to determine overall amplitude, and outputs a 4-20 mA dc current that is proportional to a range of 0 to 250� F (-17.8 to 121�C). Combining transmitters with an existing PLC or DCS system results in a high density, low cost vibration monitoring system.

The CMCP570A Alarm Module provides ok, alert and danger relays, selectable time delay, trip multiply, bypass and 0 to 5 VDC outputs for displays. The relay outputs can be used to trigger machine shut-down or other alarms. Combining transmitters with an existing PLC or DCS system results in a high density, low cost vibration monitoring system.

CMCP-580A Process Variable Monitor - Ordering Page

CMCP-585A Eccentricity Monitor - Ordering Page

CMCP-590A Acceleration Enveloping Monitor - Ordering Page

CMCP-591 High Pass Filters for CMCP-500 Series Transmitters/Monitors - Ordering Page

Optional 8 Pole High Pass Filter for CMCP500 Series Transmitters and Monitors.

CMCP-592 Low Pass Filter for CMCP-500 Series Transmitters/Monitors - Ordering Page

Optional 8 Pole Low Pass Filter for CMCP500 Series Transmitters and Monitors.

CMCP-547A Differential Expansion Monitor - Ordering Page

CMCP-548A Case Expansion Monitor - Ordering Page