STI - Leaders in Vibration Monitoring and Machine Protection Systems.

You are here: Home > Monitoring Systems

Sort By:

Page of 1

CMCP-1000 Dual Limit Solid State Vibration Switch - Ordering Page

The CMCP-1000 is a single channel vibration monitor with an integral accelerometer packaged in an explosion-proof housing.

Suitable for NEC Division I hazardous areas

Designed to comply with rigid API670 standards

Exceeds the capabilities of mechanical vibration switches

Outputs: Relays for alert and danger, 4-20 mA, and a buffered transducer output

CMCP-1000C Dual Limit Solid State Vibration Switch with Large Enclosure - Ordering Page

Similar to the CMCP-1000 but optioned with a larger enclosure allowing the user more wiring room.

Single channel Vibration Monitor with an integral accelerometer

Explosion-proof housing that is suitable for NEC Division I hazardous areas

Complies with rigid API670 standards

Exceeds the capabilities of mechanical vibration switches

CMCP-5301 One Channel Complete Monitoring System - Ordering Page

The CMCP5301 accept inputs from any industry standard 100 mV/g accelerometer, condition�s the input signals to velocity and provides a digital display and alarm status indication. Analog outputs (4-20 mA) are provided for each channel for interface to a PLC or DCS for trending, alarm and operator interface. The alarm contacts for the OK circuit, and Alert and Danger may be interfaced to machine control and shutdown systems for a complete vibration protection solution. The system is a pre-wired turn-key package with power supply, and bright LED display(s). The power supply accepts 110 or 220 VAC, 50 or 60 Hz. They are available in either an English or Metric configuration.

CMCP-5302 Two Channel Complete Monitoring System - Ordering Page

The CMCP5302 accept two inputs from any industry standard 100 mV/g accelerometer, condition�s the input signals to velocity and provides a digital display and alarm status indication. Analog outputs (4-20 mA) are provided for each channel for interface to a PLC or DCS for trending, alarm and operator interface. The alarm contacts for the OK circuit, and Alert and Danger may be interfaced to machine control and shutdown systems for a complete vibration protection solution. The system is a pre-wired turn-key package with power supply, and bright LED display(s). The power supply accepts 110 or 220 VAC, 50 or 60 Hz. They are available in either an English or Metric configuration.

CMCP-5304 4 Channel Complete General Machine Monitoring System - Ordering Page

The CMCP5304 accept four inputs from any industry standard 100 mV/g accelerometer, condition�s the input signals to velocity and provides a digital display and alarm status indication. Analog outputs (4-20 mA) are provided for each channel for interface to a PLC or DCS for trending, alarm and operator interface. The alarm contacts for the OK circuit, and Alert and Danger may be interfaced to machine control and shutdown systems for a complete vibration protection solution. The system is a pre-wired turn-key package with power supply, and bright LED display(s). The power supply accepts 110 or 220 VAC, 50 or 60 Hz. They are available in either an English or Metric configuration.

Monitoring System Enclosure