STI - Leaders in Vibration Monitoring and Machine Protection Systems.

You are here: Home > Temperature

Sort By:

Page of 1

CMCP-1210 Spring Loaded Tip Sensitive Bearing Temperature Sensors - Ordering Page

The CMCP-1210 bearing temperature sensor provides, fast and accurate readings from bearings, blocks, and other solids.

Spring-loaded holder ensures solid contact in drilled holes with a built-in oil seal

Copper alloy tip for quick response to temperature changes

Probe may be cut to length in the field using a tube cutter

Available with RTD or Thermocouple sensing element

Aluminum or stainless steel connection head (explosion-proof version available)

CMCP-560A Isolated RTD Temperature Monitor - Ordering Page

The CMCP560 RTD Temperature Monitor is compatable with 100 Ohm Platinum 3 wire RTD's. Available in English scaling, the CMCP560 checks for faults, processes the temperature signal to determine overall amplitude, and outputs a 4-20 mA dc current that is proportional to a range of 0 to 250� F (-17.7 to 121� C). Combining transmitters with an existing PLC or DCS system results in a high density, low cost vibration monitoring system.

The CMCP560A Alarm Module provides ok, alert and danger relays, selectable time delay, trip multiply, bypass and 0 to 5 VDC outputs for displays. The relay outputs can be used to trigger machine shut-down or other alarms. Combining transmitters with an existing PLC or DCS system results in a high density, low cost temperature monitoring system.

CMCP-565 Isolated Thermocouple Temperature Transmitter - Ordering Page

CMCP-565A Isolated Thermocouple Temperature Monitor - Ordering Page

CMCP-570 Solid State Temperature Transmitter - Ordering Page

The CMCP570 Solid State Temperature Transmitter is compatable with Accelerometers with internal solid state temperature sensing elements such as the 793T and 797T. It is available in English or Metric scaling. The CMCP565 provides constant current power, checks for faults, processes the temperature signal to determine overall amplitude, and outputs a 4-20 mA dc current that is proportional to a range of 0 to 250� F (-17.8 to 121�C). Combining transmitters with an existing PLC or DCS system results in a high density, low cost vibration monitoring system.

CMCP-570A Solid State Temperature Monitor - Ordering Page

The CMCP570 Solid State Temperature Monitor is compatable with Accelerometers with internal solid state temperature sensing elements such as the 793T and 797T. It is available in English or Metric scaling. The CMCP565 provides constant current power, checks for faults, processes the temperature signal to determine overall amplitude, and outputs a 4-20 mA dc current that is proportional to a range of 0 to 250� F (-17.8 to 121�C). Combining transmitters with an existing PLC or DCS system results in a high density, low cost vibration monitoring system.

The CMCP570A Alarm Module provides ok, alert and danger relays, selectable time delay, trip multiply, bypass and 0 to 5 VDC outputs for displays. The relay outputs can be used to trigger machine shut-down or other alarms. Combining transmitters with an existing PLC or DCS system results in a high density, low cost vibration monitoring system.