|
|
|
|
|
|
CMCP-Magnetic Base-01
|
Our Price: $79.95
|
|
|
- Stainless Steal
- 1/4-28 Integral Thread
|
|
|
|
|
|
|
|
|
|
|
|
|
CMCP-200 Accelerometer Mounting Pads
|
|
Our Price: $9.00
|
|
|
Accelerometer mounting pads designed for epoxy mounting accelerometers to a prepared surface.
- Manufactured from stainless steel and are 1" (2.54 cm) in diameter
- Available in 1/4" (0.64 cm) or 3/8" (0.95 cm) thicknesses
- 1/4" x 28 UNF tapped hole
- Lapped on one side to provide an ideal surface for accelerometer mounting
|
|
|
|
|
|
|
|
|
|
|
|
|
CMCP-203 NPT Pipe Thread Accelerometer Mounting Adapter
|
|
Our Price: $20.00
|
|
|
Make use of existing plugged holes on your machine for accelerometer mounting.
- Manufactured from 316 Stainless Steel and surfaced for accelerometer mounting
- Available in 1/4", 3/8", 1/2" and 3/4" NPT
- 1/4”-28 threaded hole to mate with the most common accelerometers and vibration transmitters
|
|
|
|
|
|
|
|
|
|
|
|
|
CMCP-210 Acrylic Adhesive Bypacs For Accelerometer Mounting
|
|
Our Price: $12.00
|
|
|
Acrylic Adhesive Bypacs are an easy to use solution for gluing Accelerometer Mounting Pads to a prepared surface area on the bearing housing. The adhesive is prepared inside the Bypac by removing the plastic separator and kneading together the two adhesive components. A corner of the bag is then removed to allow easy dispensing of the mixture. Each Bypac will glue two (2) Accelerometer Mounting Pads. A Material Safety Data Sheet for this product can be supplied on request.
|
|
|
|
|
|
|
|
|
|
|
|
|
CMCP-211 Depend 330 Adhesive and Activator For Accelerometer Mounting
|
|
Our Price: $40.00
|
|
|
Simple, easy to use solution for gluing Accelerometer mounting pads to a machine surface. Each kit will mount 25-50 pads. Please note that MSDS requires that this product ship UPS Ground only.
|
|
|
|
|
|
|
|
|
|
|
|
|
CMCP-212 Silicone Dielectric For Accelerometer Mounting - 1-oz.
|
|
Our Price: $18.00
|
|
|
In high frequency accelerometer applications, it is recommended by the manufacturer to apply a thin coating of Silicone Dielectric between the accelerometer and the mounting surface before mounting the accelerometer to the proper torque. The dielectric helps insure the transmittal of high frequency vibration across the mounting interface. When an accelerometer is installed in harsh or moist environments, Silicone Dielectric is also recommended for additional sealing of the accelerometer's connector. Each one (1) ounce tube of Silicone Dielectric will install approximately 50 to 100 accelerometers. When also used as a connector sealant, each tube will install approximately 15 to 25 accelerometers.
|
|
|
|
|
|
|
|
|
|
|
|
|
CMCP-213 Clear Silicone Sealant For Accelerometer Mounting - Tube
|
|
Our Price: $18.00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
CMCP-214 Loctite 20162 ODC Free Cleaner/Degreaser - 16 oz. Pump Spray
|
|
Our Price: $25.00
|
|
|
A non-aqueous, hydrocarbon-based solvent designed for cleaning and degreasing surfaces to be bonded with adhesives, as well as for general purpose industrial cleaning. Safe on aluminum, rubber, and most plastics, and will not cause flash rusting on water sensitive parts. Dries residue free. Contains no ozone-depleting compounds.
|
|
|
|
|
|
|
|
|
|
|
|
|
CMCP-220 Accelerometer Adhesive Mounting Pad Kits
|
|
Our Price: $360.00
|
|
|
The CMCP-220 Kits provides all of the items necessary for adhesive mounting 10, 32, 64 or 128 accelerometers.
|
|
|
|
|
|
|
|
|
|
|
|
|
CMCP-230 Accelerometer Mounting Studs
|
|
Our Price: $15.00
|
|
|
Accelerometer mounting studs (10 pack) are used to mount 1/4" thick STI Mounting Pads directly to the tapped bearing housing in combination with epoxy. The 3/4" long stud provides the proper length for mounting the pad to the bearing surface and in turn the accelerometer to the stud. Allen studs are made of stainless steel and have 1/4" x 28 UNF threads. Allen head studs are provided in packs of ten (10).
|
|
|
|
|
|
|
|
|
|
|
|
|
CMCP-250 Accelerometer Mounting Kit
|
|
Our Price: $695.00
|
|
|
Mount your Accelerometers quickly and easily with the CMCP250 Accelerometer Mounting Kit. The kit includes all the items required to mount up to 33 Accelerometers, 25 Mounting Pad Mounts and 8 Motor Cooling Fin Mounts.
|
|
|
|
|
|
|
|
|
|
|
|
|
CMCP-270 Ceramic Wire Nuts - Pack of 100
|
|
Our Price: $60.00
|
|
|
Ceramic wire nuts are recommended for paper machine applications to connect accelerometer extension cables to the CMCP-400 20 AWG instrument cable. The wire nuts have no metal parts and are not subject to corrosion. It is recommended that Silicone RTV be applied to the wire ends before installation of the connector.
|
|
|
|
|
|
|
|
|
|
|
|
|
CMCP-271 High Temperature Tefzel Tie Wraps
|
|
Our Price: $145.00
|
|
|
High Temp Cable Ties
|
|
|
|
|
|
|
|
|
|
|
|
|
CMCP-272 Stainless Steel Wire Clips
|
|
Our Price: $25.00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
CMCP-273-01 1/16" Diameter Heat Shrink Tubing - 25x 48" Pieces
|
|
Our Price: $75.00
|
|
|
|
|
|
|
|
|
|
