|
|
(Your shopping cart is empty)
Welcome.
Online Ecommerce Store
Accelerometers
Low Cost, Integral Cable, Side Mount, Standard Connector
| 
Mounting Hardware
Extension Cables, Mounting Pads, Discs, Motor Fin Mounts
| 
BNC Boxes
Individual BNC Enclosures, Switchable BNC Enclosures, Din Rail Mount
| 
Tachometers
Din Rail, Panel Mount, Explosion Proof, RPM, ROA & Zero Speed
| 
2-Wire Transmitters
Loop Powered, 2-Wire, Vibration, Temperature Transmitters
| 
3-Wire Transmitters
Din Rail Mounted, Vibration, Temperature, TSI Function Transmitters
| 
Monitoring Systems
Complete Vibration Monitoring Systems, Ready to Install
| 
Rotor Kits
Rotor Kits for Training, Short and Long Base. Bearing Fault Demonstrators
|
Featured Products!
|
CMCP310FG NEMA 4X Fiberglass Switchable BNC Junction Boxes
|
|
CMCP1100 Low Cost Industrial Accelerometer with Integral Cable
|
|
Our Price: $400.00
|
|
|
|
Our Price: $99.00
|
|
|
|
|
|
The CMCP310 series BNC Junction Boxes are multiple channel connecting centers for terminating the outputs of accelerometers or other transducer field wiring. They are normally located in close proximity to the machine to reduce wiring cost and provide convenient access to the vibration signal by a portable data collector or analyzer. They are available in 6, 12, 24, 32 and 48 Channel versions and in Fiberglass, Painted Steel and Stainless Steel Enclosures.
|
The CMCP1100 Low-Cost Industrial Accelerometer is manufactured with an integral cable and is fully enclosed in a potted and waterproof stainless steel case.
Three standard cable lengths are always in stock
Small case size and footprint: 1/2” x 1.05”
100 mV/g Sensitivity
0.32 Hz to 10 KHz Frequency Range
Optional BNC Connector
|
|
|
|
CMCP5302 Two Channel Complete Monitoring System
|
|
CMCP312 12 Channel DIN Rail Mount Switchable BNC
|
|
Our Price: $2,195.00
|
|
|
|
Our Price: $225.00
|
|
|
|
|
|
The CMCP5302 accept two inputs from any industry standard 100 mV/g accelerometer, condition’s the input signals to velocity and provides a digital display and alarm status indication. Analog outputs (4-20 mA) are provided for each channel for interface to a PLC or DCS for trending, alarm and operator interface. The alarm contacts for the OK circuit, and Alert and Danger may be interfaced to machine control and shutdown systems for a complete vibration protection solution. The system is a pre-wired turn-key package with power supply, and bright LED display(s). The power supply accepts 110 or 220 VAC, 50 or 60 Hz. They are available in either an English or Metric configuration.
|
STI Vibration Monitoring Inc. provides a Switchable BNC Output for up to 12 Accelerometers and easy access for connecting Data Collectors and Analyzers.The CMCP312 small size allows it to be mounted almost anywhere.
|
|
|
|
CMCP420VT-T Dual Parameter Loop-Powered Vibration and Temperature Transmitter
|
|
CMCP420VT Loop-Powered Vibration Transmitter
|
|
Our Price: $595.00
|
|
|
|
Our Price: $395.00
|
|
|
|
|
|
The CMCP420VT-T is a Dual Parameter solid state, loop powered vibration and temperature transmitter. It provides a 4-20 mA output that is proportional to overall vibration in terms of velocity and a additional 4-20 mA output for temperature. The CMCP420VT-T continuously monitors machinery health and transmits directly into a PLC or DCS for trending, alarm and machine shutdown (Display Not Included)
|
The CMCP420VT is a solid state, loop powered vibration transmitter. It provides a 4-20 mA output that is proportional to overall vibration in terms of velocity. The CMCP420VT continuously monitors machinery health and transmits directly into a PLC or DCS for trending, alarm and machine shutdown. In addition, the CMCP420VT provides access to the dynamic transducer output. Portable data collector/analyzers can be utilized for detailed machine fault analysis. (Display Not Included)
|
|
|
|
|
|
|
