CMCP590 Acceleration Enveloping Transmitter

Home > Transmitters (Din Rail) >

Acceleration Enveloping Transmitter/Monitor

Alternative Views:

Our Price: $550.00

Product Code: CMCP590

Filters

Alarm Module

Description

The CMCP590 Transmitter are a 4-20mA enveloped acceleration transmitter. Used in with a 100mV/g accelerometer, it processes the dynamic vibration acceleration input signal to defects in over-rolling bearing defects or gearbox problems.

Alarms relays and trip multiply are available with the Monitor version.

Alarms - The CMCP500A Series Monitors have two independent set points, with LED alarm indicators and output relay contacts (Alert and Danger). Set points are adjustable via potentiometer, from 0 to 110% of full scale. Each has an adjustable delay of 1 to 10 seconds. SPST Relay contacts are rated 5 Amps @ 30 Vdc or 250 Vac for resistive loads.

CMCP500 Monitor Approval Label

Relay contacts can be independently configured by the user for either Normally Open (NO) (Standard) or Normally Closed (NC) operation. Relays are normally de-energized and can be configured for latching or non-latching (standard) operation. Latched alarms may be reset locally or by remote contact closure.

Trip Multiply - The monitors have set point multiplication of 3X via contact closure (2X available). To avoid tripping the alarms during machine start-up.

Documents Available:

Browse for more products in the same category as this item:

Transmitters (Din Rail)

	CMCP546 Absolute Vibration Transmitters $670.00
	CMCP280 API-670 Accelerometer Housing $225.00
	CMCP420EL 90 Degree 3/4" x 3/4" NPT Elbow for CMCP420VT $15.00
	CMCP510 LED Digital Display for 4-20 mA Transmitters $195.00
	CMCP802 3/4"NPT to 1/2"NPT Adapter for CMCP801 (Adds 2" to Height) $75.00
	CMCP420WF 3/4" NPT Weatherproof Cable Fitting for CMCP420VT $15.00
	CMCP515 24 VDC Power Supply, 110/220 VAC $64.00
	CMCP505 LED Digital Display for 0-5 VDC Monitors $130.00