|
|
|
|
|
|
CMCP250 Accelerometer Mounting Kit
|
Our Price: $595.00
|
|
|
Mount your Accelerometers quickly and easily with the CMCP250 Accelerometer Mounting Kit. The kit includes all the items required to mount up to 33 Accelerometers, 25 Mounting Pad Mounts and 8 Motor Cooling Fin Mounts.
|
|
|
|
|
|
|
|
|
|
CMCP200 Accelerometer Mounting Pads
|
|
Our Price: $7.00
|
|
|
Accelerometer mounting pads designed for epoxy mounting accelerometers to a prepared surface.
- Manufactured from stainless steel and are 1" (2.54 cm) in diameter
- Available in 1/4" (0.64 cm) or 3/8" (0.95 cm) thicknesses
- 1/4" x 28 UNF tapped hole
- Lapped on one side to provide an ideal surface for accelerometer mounting
|
|
|
|
|
|
|
|
|
|
CMCP210 Acrylic Adhesive Bypacs For Accelerometer Mounting
|
|
Our Price: $12.00
|
|
|
Acrylic Adhesive Bypacs are an easy to use solution for gluing Accelerometer Mounting Pads to a prepared surface area on the bearing housing. The adhesive is prepared inside the Bypac by removing the plastic separator and kneading together the two adhesive components. A corner of the bag is then removed to allow easy dispensing of the mixture. Each Bypac will glue two (2) Accelerometer Mounting Pads. A Material Safety Data Sheet for this product can be supplied on request.
|
|
|
|
|
|
|
|
|
|
CMCP220 Accelerometer Adhesive Mounting Pad Kits
|
|
Our Price: $360.00
|
|
|
The CMCP220 Kits provides all of the items necessary for adhesive mounting 10, 32, 64 or 128 accelerometers.
|
|
|
|
|
|
|
|
|
|
CMCP230 Accelerometer Mounting Studs
|
|
Our Price: $15.00
|
|
|
Accelerometer mounting studs (10 pack) are used to mount 1/4" thick STI Mounting Pads directly to the tapped bearing housing in combination with epoxy. The 3/4" long stud provides the proper length for mounting the pad to the bearing surface and in turn the accelerometer to the stud. Allen studs are made of stainless steel and have 1/4" x 28 UNF threads. Allen head studs are provided in packs of ten (10).
|
|
|
|
|
|
|
|
|
|
CMCP211 Depend 330 Adhesive and Activator For Accelerometer Mounting
|
|
Our Price: $40.00
|
|
|
Simple, easy to use solution for gluing Accelerometer mounting pads to a machine surface. Each kit will mount 25-50 pads. Please note that MSDS requires that this product ship UPS Ground only.
|
|
|
|
|
|
|
|
|
|
CMCP272 Stainless Steel Wire Clips
|
|
Our Price: $25.00
|
|
|
|
|
|
|
|
|
|
|
|
|
CMCP280 API-670 Accelerometer Housing
|
|
Our Price: $225.00
|
|
|
The CMCP280 case mount accelerometer housing provides physical and environmental protection for several sensors when permanently mounted. Its use is primarily designed for installations where the accelerometer is prone to damage from adverse conditions. When properly installed the CMCP280 meets API 678 standards.
|
|
|
|
|
|
|
|
|
|
CMCP203 NPT Pipe Thread Accelerometer Mounting Adapter
|
|
Our Price: $20.00
|
|
|
Make use of existing plugged holes on your machine for accelerometer mounting.
- Manufactured from 316 Stainless Steel and surfaced for accelerometer mounting
- Available in 1/4", 3/8", 1/2" and 3/4" NPT
- 1/4”-28 threaded hole to mate with the most common accelerometers and vibration transmitters
|
|
|
|
|
|
|
|
|
|
CMCP-Magnetic Base-01
|
|
Our Price: $79.95
|
|
|
- Stainless Steal
- 1/4-28 Integral Thread
|
|
|
|
|
|
|
|
|
|
CMCP212 Silicone Dielectric For Accelerometer Mounting - 1-oz.
|
|
Our Price: $18.00
|
|
|
In high frequency accelerometer applications, it is recommended by the manufacturer to apply a thin coating of Silicone Dielectric between the accelerometer and the mounting surface before mounting the accelerometer to the proper torque. The dielectric helps insure the transmittal of high frequency vibration across the mounting interface. When an accelerometer is installed in harsh or moist environments, Silicone Dielectric is also recommended for additional sealing of the accelerometer's connector. Each one (1) ounce tube of Silicone Dielectric will install approximately 50 to 100 accelerometers. When also used as a connector sealant, each tube will install approximately 15 to 25 accelerometers.
|
|
|
|
|
|
|
|
|
|
CMCP213 Clear Silicone Sealant For Accelerometer Mounting - Tube
|
|
Our Price: $18.00
|
|
|
Note: This item is classified as a Hazardous Material. For all shipment methods other than UPS Ground, there will be a $75.00 HazMat Handling Fee added at the time of shipment. This fee covers the required shipping container and all necessary paperwork.
|
|
|
|
|
|
|
|
|
|
CMCP214 Loctite 20162 ODC Free Cleaner/De-greaser - 16 oz. Pump Spray
|
|
Our Price: $25.00
|
|
|
A non-aqueous, hydrocarbon-based solvent designed for cleaning and degreasing surfaces to be bonded with adhesives, as well as for general purpose industrial cleaning. Safe on aluminum, rubber, and most plastics, and will not cause flash rusting on water sensitive parts. Dries residue free. Contains no ozone-depleting compounds.
|
|
|
|
|
|
|
|
|
|
CMCP273-01 1/16" Diameter Heat Shrink Tubing - 25x 48" Pieces
|
|
Our Price: $75.00
|
|
|
|
|
|
|
