|
|
|
|
|
|
CMCP602L Standard 2-Pin Accelerometer Cables
|
Our Price: $44.00
|
|
|
The CMCP602L extension cables are designed to work with all Accelerometers using a MIL Spec 5015 2-pin connector. The cables utilize an environmental designed MIL Spec. Connector with a positive seal “0” ring that mates with the MIL-C-5015 connector found on most accelerometers. Connector backshells are fully potted and designed to be water tight. 20 AWG cable is twisted and shielded for EMI and RFI protection. The CMCP602L is available in three standard lengths of 16’, 32’ and 64’. Any length desired may be specified and ordered as an option. The wire is 0.200” in diameter.
|
|
|
|
|
|
|
|
|
|
CMCP270 Series Accelerometer Mounting Tool Kits
|
|
Our Price: $225.00
|
|
|
Piloted End Mill Aircraft Spot Reamers are used to mill a 1" (2.54 cm) smooth flat area on bearing housings. The flat area will accept a stud mounted accelerometer or a glue (epoxy) mounted with an STI Accelerometer Mounting Pad. Kits are available for 1/4"-28, M8 and M6 threaded sensors.
|
|
|
|
|
|
|
|
|
|
CMCP265FG NEMA 4X Fiberglass Termination Boxes
|
|
Our Price: $150.00
|
|
|
The CMCP265FG series Termination Junction Boxes are multiple channel connecting centers for terminating the outputs of accelerometers or other transducer field wiring. crew Clamp DIN Rail Mounted terminals (3 per channel) are provided for the intermediate termination of Accelerometers, Proximity Probes, Speed Sensors, RTD’s, and other transducers. The CMCP265FG enclosures are made of molded fiberglass polyester and is easily punched or drilled. It has outstanding chemical and temperature resistance and physical properties. A seamless foam in-place gasket assures a watertight and dust tight seal. Screw covers are secured with captivated monel cover screws. 5 Sizes are available from 2 to 16 Channels (6 to 48 Terminals).
|
|
|
|
|
|
|
|
|
|
CMCP250 Accelerometer Mounting Kit
|
|
Our Price: $595.00
|
|
|
Mount your Accelerometers quickly and easily with the CMCP250 Accelerometer Mounting Kit. The kit includes all the items required to mount up to 33 Accelerometers, 25 Mounting Pad Mounts and 8 Motor Cooling Fin Mounts.
|
|
|
|
|
|
|
|
|
|
CMCP200 Accelerometer Mounting Pads
|
|
Our Price: $7.00
|
|
|
Accelerometer mounting pads designed for epoxy mounting accelerometers to a prepared surface.
- Manufactured from stainless steel and are 1" (2.54 cm) in diameter
- Available in 1/4" (0.64 cm) or 3/8" (0.95 cm) thicknesses
- 1/4" x 28 UNF tapped hole
- Lapped on one side to provide an ideal surface for accelerometer mounting
|
|
|
|
|
|
|
|
|
|
CMCP210 Acrylic Adhesive Bypacs For Accelerometer Mounting
|
|
Our Price: $12.00
|
|
|
Acrylic Adhesive Bypacs are an easy to use solution for gluing Accelerometer Mounting Pads to a prepared surface area on the bearing housing. The adhesive is prepared inside the Bypac by removing the plastic separator and kneading together the two adhesive components. A corner of the bag is then removed to allow easy dispensing of the mixture. Each Bypac will glue two (2) Accelerometer Mounting Pads. A Material Safety Data Sheet for this product can be supplied on request.
|
|
|
|
|
|
|
|
|
|
CMCP602H High Temp. 2-Pin Accelerometer Cables
|
|
Our Price: $49.00
|
|
|
The CMCP602H High Temperature Extension cables are designed to work with all Accelerometers using a 2-pin MIL Spec 5015 connector. The cables utilize an environmental designed MIL Spec. Connector with a positive seal “0” ring that mates with the MIL-C-5015 connector found on most accelerometers. Connector backshells are fully potted and designed to be water tight. 20 AWG cable is twisted and shielded for EMI and RFI protection. The CMCP602H cables are available in three standard lengths of 16’, 32’ and 64’. Any length desired may be specified and ordered as an option. The Teflon coated wire is 0.200" in diameter.
|
|
|
|
|
|
|
|
|
|
|
CMCP265PS NEMA 4 Painted Steel Termination Boxes
|
|
Our Price: $175.00
|
|
|
The CMCP265PS series Termination Junction Boxes are multiple channel connecting centers for terminating the outputs of accelerometers or other transducer field wiring. crew Clamp DIN Rail Mounted terminals (3 per channel) are provided for the intermediate termination of Accelerometers, Proximity Probes, Speed Sensors, RTD’s, and other transducers.
The CMCP265PS NEMA 4 enclosure is constructed of 14 gauge mild steel and is ANSI 61 gray polyester powder coated on the all surfaces. A seamless foam in-place gasket assures a watertight and dust tight seal. 5 Sizes are available from 2 to 16 Channels (6 to 48 Terminals).
|
|
|
|
|
|
|
|
|
|
CMCP220 Accelerometer Adhesive Mounting Pad Kits
|
|
Our Price: $360.00
|
|
|
The CMCP220 Kits provides all of the items necessary for adhesive mounting 10, 32, 64 or 128 accelerometers.
|
|
|
|
|
|
|
|
|
|
CMCP230 Accelerometer Mounting Studs
|
|
Our Price: $15.00
|
|
|
Accelerometer mounting studs (10 pack) are used to mount 1/4" thick STI Mounting Pads directly to the tapped bearing housing in combination with epoxy. The 3/4" long stud provides the proper length for mounting the pad to the bearing surface and in turn the accelerometer to the stud. Allen studs are made of stainless steel and have 1/4" x 28 UNF threads. Allen head studs are provided in packs of ten (10).
|
|
|
|
