STI's CMCP200M Series Magnetic Accelerometer Mounting Pads are used for glue (epoxy) mounting accelerometers to a prepared surface. Mounting pads are made from 416 stainless steel and are 1" (2.54 cm) in diameter and either 1/4" (0.64 cm) or 3/8" (0.95 cm) thick. 416 is a ferrous material which allows the user to attached a magnet to the pad. The pads are lapped on one side to provide an ideal surface for accelerometer mounting. The pads are also provided with a 1/4" x 28 UNF tapped thru-hole for accelerometer mounting. The 1/4" thick version is recommended for low clearance installations or when using the combination epoxy and stud mounting method. The 3/8" thick version is recommended for installing side exit accelerometers.
CMCP200M-01 (1/4" Thick)
CMCP200M-02 (3/8" Thick)
Get access to the latest deals and more!