• Solid State Reliability
• Integral Sensor (Also Uses External Sensor)
• Two Levels of Alarm with Relays
• True “OK” Circuitry with Relay
• Adjustable Time Delays
• Trip Multiply
• 4-20mA Output
• Remote Reset
• Buffered Transducer Output
• Bright LED Digital Readout
• 0-1.0 in/sec, 0-2.0 in/sec, 0-25 mm/sec or 0-50 mm/sec RMS Range

The CMCP1000 is a single channel Vibration Monitor with an integral accelerometer packaged in an explosion-proof housing that is suitable for NEC Division I hazardous areas. Designed to comply with rigid API670 standards, the CMCP1000 far exceeds the capabilities of competitive vibration switches.

In addition to the key features listed above, the CMCP1000 offers a buffered transducer output for detailed diagnostics and optional high-pass and low-pass filters to monitor specific frequency bands.

Electrical:
Range: English 0-1.0, 0-2.0 in/sec RMS, Metric 0-25, 0-50 mm/sec RMS
Power: Accepts 110 VAC or 220 VAC, 60 or 50 Hz
Frequency Response: (-3 dB) 2 Hz to 2 kHz
Buffered Output: BNC Connector 0-20 kHz
Accuracy: 0.5 % of Full Scale
Range Output: 4-20 mA proportional to the full scale range
Relay output for Alert and Danger alarms
Maximum Load: 600 Ohms Resistive per channel
Case: Isolated

Environmental:
Operating Temp.: -20oC to +80oC (-4oF to +176oF)
Storage Temp.: -55oC to +125oC (-67oF to +257oF)
Relative Humidity: 0 - 95% Non-Condensing
Approvals: FM, CSA, UL  Class I (BCD), Class II (E,F,G)

Mechanical:
Physical Dimensions: 5-7/16" W x 5-5/8" H x 5-5/8" D
                               (138mm x 143mm x 143mm
Mounting: 3 Bolt Mount