Meets API670 external mounting specifications. 316 Stainless Steel. Provided with four 3/4" NPT conduit hubs. 3/4" NPT Machine Case Entry. Field Trimable. Stock Insertion Depth 12" (30.48 cm). The CMCP801 Probe Holder is designed for the external mounting of Proximity (Eddy) Probes as described and recommended by API-670.
External (through the case) mounting allows for the easy removal, inspection, and adjustment of the Proximity Probe as opposed to internal mounting where the bearing cap or cover needs to be removed prior to inspection.The CMCP801 Probe Holder has an adjustment range of plus or minus 1" (2.54 cm), 2" (5.08 cm) overall. The CMCP801 can be cut in the field or by a local machine shop to the required insertion depth.
Additional insertion depth can be added by using longer Proximity Probes. All machined parts of the CMCP801 Probe Holder are made of 316 Stainless Steel. The outlet body and extension are cast aluminum. The outlet body is provided with four (4) 3/4" NPT Hubs and is rated for Class 1 and 2, Division A, B, C and D. As the Probe Holder uses 3/4" NPT entry into the machine case a standoff if required, can easily be constructed using readily available 3/4" pipe and pipe fittings.
Documents Available:
 
|
Features:
Each probe Holder is provided with the following:
Outlet Body w/Dome Lid
Close up Plugs(3) 3/4" NPT
Probe Adapter Union 3/4" NPT
Probe Holder (Stinger)
Jam Nut 1-1/4" Wrench Size
Parker Seal
Technical Specs:
Specifications:
Outlet Body and Dome Lid: Aluminum
Machined Parts: 316 Stainless Steel
Machine Entry: 3/4" NPT
Conduit Fittings: 3/4" NPT
Outlet Body Width: 4.1" (10.4 cm)
Max Height Above Machine: 5.75" (14.6 cm)
Max Stinger Diameter: 0.5" (1.27 cm)
Maximum Length: 12" (30.48 cm) 12.0" Insertion Depth (Max)
|
|
